Xybella Logo  
  Industrial software
    - PLC
    - HMI
    - SCADA

Mitsubishi PLC programmers and programmable logic controllers (PLCs)

System Q

FX Series

A Series

Xybella supplies the following expertise:

Mitsubishi programmers

A Mitsubishi programmer has a good understanding of automation software across the whole range of Mitsubishi equipment. This includes; PLCs, HMIs, SCADA systems and Motion control.

Mitsubishi software engineer (System integration)
A Mitsubishi software engineer is able to configure all the Mitsubishi range of control equipment to produce a working solution i.e. PLC, HMI or SCADA, drives, sensors and the control networks CC-Link, Melsec Net/H and Ethernet.

Mitsubishi PLC programmer (Control know-how)
A Mitsubishi PLC programmer can write PLC code using GX Developer, GX IEC developer and GX Works2.

Mitsubishi MELSEC MEDOC programmers
Medoc provides a DOS based ladder programming environment for FX and A series PLCs.

Mitsubishi GX Developer programmers
GX Developer contains four editors for programming in Ladder, Melsec Instruction List, Structured Text and Sequential Function Chart.

Mitsubishi GX IEC Developer programmers
GX IEC Developer is compliant with IEC 61131 and has a range of programming language editors; Instruction List (IL), Ladder (LD), Function Block Diagram (FBD), Sequential Function Chart (SFC) and Structured Text (ST).

Mitsubishi GX Works2 Developer programmers
GX Works2 contains the editors from GX Developer and GX IEC developer in a single programming environment.

The programmer also has knowledge of how to control equipment such as motors, valves and electrical solenoids together with an understanding of how to read analogue values and interpret digital signals.

Mitsubishi PLC engineer (Hardware expert)
A Mitsubishi PLC engineer may design and specify all the PLC hardware required to interface to the equipment under control.


Mitsubishi PLC Family


Mitsubishi PLC Range

  PLC range name Product Code Comms Ports I/O Card system Programming software
MELSEC System Q series Q00J Q00 Q01 Q02 Q02H Q06H Q12H Q25H Q172 Q173 USB and Serial Backplane

1. Melsoft GX Developer
2. Melsoft GX IEC Developer
3. Melsoft GX Works2

MELSEC FX series


Serial Fixed I/O with optional Interlocking cards

2. Melsoft GX Developer
3. Melsoft GX IEC Developer
3. Melsoft GX Works2


MELSEC QnAD series QnAS Series CPU's :-
RS 422 Backplane 1. MELSEC MEDOC
2. Melsoft GX Developer
3. Melsoft GX IEC Developer


A series

AnS Series CPU's :-


RS 422 Backplane

2. Melsoft GX Developer
3. Melsoft GX IEC Developer





Mitsubishi System Q series PLC programmers
The Q series has the fastest communications update rate, largest memory and highest I/O capacity. Its programs can control whole automation areas. Multiple programmers are able to write code concurrently while online to a single PLC. Typical applications include batch control, complex machinery and process control.


Mitsubishi QnA PLC programmers
The QnA is is a transitional format to allow the I/O from the A series to be used by the Q series processing power.


Mitsubishi FX PLC programmers
The FX has a very small footprint, ideal where control panel space is at a premium. It is a good solution for applications where the I/O is relatively low. Their installed base is in excess of 10 million. These PLCs may programmed using Melsoft GX Developer or Melsoft GX IEC Developer software.


Mitsubishi A series PLC programmers
The A series have been used historically to control large plant areas in the same way as System Q does now. Their large footprint and complex configuration mean that there will be few new projects. However, their high reliability means that they will continue in service for many years to come.



Company | Contact Us

Copyright © Xybella Ltd

Felaw Maltings, 44 Felaw Street
Ipswich, Suffolk, IP2 8SJ, UK
Tel: +44 (0)1473 407925






Xybella Ltd believes all information provided on this website to be accurate. The content is provided for the purposes of information only and is solely our opinion. Xybella Ltd is not liable for the accuracy, quality and comprehensiveness of information on the website or for the results obtained from the use of it. Xybella Ltd offers no warranty or guarantee for any contents on this website. All content should be analysed, evaluated and checked before making use of it. Xybella Ltd is not responsible for any errors or omissions.

Our expertise is covered under the following general titles: System integrators, Control system software engineers, Automation support engineers, PLC integrators, Control systems, Software programming.

This page covers software engineering under the following categories: Mitsubishi system integrators, Mitsubishi programmers, Mitsubishi software engineers, Mitsubishi PLC programmers, Mitsubishi PLC engineers, Mitsubishi PLC programming, Mitsubishi Q series programmers, Mitsubishi System Q programmers, Mitsubishi QnA programmers, Mitsubishi A series programmers, Mitsubishi FX programmers, Mitsubishi MELSEC MEDOC profgrammers, Mitsubishi GX developer programmers, Mitsubishi GX IEC developer programmers, Mitsubishi GX Works2 programmers.

This page covers PLCs under the following categories: Mitsubishi Q series, Mitsubishi System Q, Mitsubishi QnA series, Mitsubishi A series, Mitsubishi FX series.

We support PLCs in the following regions and counties:
Mitsubishi MELSEC Medoc, GX Developer, GX IEC Developer, GX Works2, Q Series, System Q, FX, A series in East Anglia, East Midlands, South East, Norfolk, Suffolk, Cambridgeshire, Northamptonshire, Essex, Surrey, London, Kent, East Sussex and West Sussex.